|FREE SHIPPING WITH 3 OR MORE ITEMS*|
|America's future does not have to be on the decline.
|Give the gift of a 100% Made in the USA Texas Jean to anyone!|
News & Press
Join the Texas Jeans family
Fire Resistant Work Wear
• 100% Cotton 14.5 OZ. FR treated denim
• Relaxed fit for comfort and ease of movement
• Traditional 5 pocket design
• HRC-2/20 Arc-CAL. Rated denim fabric
• Sewn with Nomex FR treated thread
• 88% Cotton-12% Nylon FR treated Pocketing
• FR Fabric meets NFPA-70E, NFPA-2112,
and OSHA Guidelines
Texas Jeans offers you flame resistant protection
in a high quality U.S.A. made jean that is built
to work as hard as you do. The 14.5 oz. 100%
cotton FR treated denim is NFPA 70E and
NFPA 2112 compliant. This jean offers a relaxed fit,
with extra room in the seat and thigh for
ease of movement. The jean features a brass
zipper fly with Nomex zipper tape, deep front
pockets, and a covered button at the
waist closure. Sewn with FR treated
Nomex thread and FR treated pocketing.
Our recommended Laundry Instructions are as follows.
The FR treatment will last the life of the garment as long as the basic home laundry instructions are followed correctly.
Fire Resistant garments can be used for daily wear as they serve for normal work apparel for many tasks. As such, they will become soiled with a wide variety of oil, grease, sweat, and dirt that is experienced daily in these occupations. These soils can disrupt the operation of the flame retardant chemistry in the fabric or in extreme cases is flammable themselves. It is there for critical that these garments are thoroughly cleaned and all contaminants removed. If during the work day a garment becomes saturated or contaminated with a high level of flammable substances it must be removed immediately and replaced with a clean garment.
Washing at home can be accomplished using any typical home laundry detergent. It is recommended FR garments be washed separately from the “family” wash to avoid cross contamination. Turning garments inside out before laundering will help prevent streaking, especially with flame resistant denim jeans. Wash on permanent press cycle with warm or hot water. DO NOT use bleach or fabric softener in the wash cycle. Tumble dry on permanent press cycle. Remove garments when dry or slightly damp and place on hanger. Garments may be ironed for smoother appearance.
If stain removal is required, any commercial stain removal product that DOES NOT contain hydrogen peroxide is acceptable. The detergent being used to launder the clothing can also be poured directly onto the stain to aid removal. It is possible heavy stains may not be completely removed, but the presence of a visible stain doesn’t necessarily compromise the flame resistant characteristics of the garment. If the smell of petroleum or solvent is present, launder the garment again, or consider dry cleaning or other professional care to remove the soil.
Garments may be dry cleaned if needed and may be helpful in removing oily soils. Some dry cleaning fluids are flammable and must be completely removed from FR garments to maintain protective performance.
Materials to Avoid:
Chlorine bleach (sodium hypochlorite) or oxygenated bleach (hydrogen peroxide) alone or in combination with materials will harm the flame resistant properties and should NEVER be used for FR garments.